Page 15 - RTA-Catalogue-EN-16+

Real-Time-Analyser

High resolution standard microscopes and special microscopes

Microscope holder – the practical fixture for your new microscope!

The microscope holder makes work easier for you, if you use more than one magnifier. Thanks to this holder your
microscope will be changed within seconds and you always have the adequate optics at hand.

This holder had been designed especially for the application with
the RTA and provides perfect support for your optics.

“Ready” version

With this microscope holder your optics has to be adjusted
only once – which saves quite a bit of time. Upon demand + =
we mount and adjust your new microscope from our accessories
programme directly in the holder (at a premium).
This means for you: Unpack, plug in, ready.

Microscope holder “long” for larger free working distance to the tool

You are frequently working with saw blades with large diameters (> Ø 350 mm)?

In that case the microscope holder “long” is exactly the proper accessory for you. By means of this holder the free
working distance between the microscope and the tool will be larger, thus offering you the
possibility to get certain sections of the tooth face in the focus even with big saw
blades.

The full range of functions of the picture will prove particularly advan-
tageous if combined with the microscope for large distances. You will
then, for example, be in the position to measure additional angles
such as the radial clearance angle or the bevel angle.

Exchangeable saw blade support d 300 – for saw blades with bore Ø >100 mm

The exchangeable saw blade support for bore diameters of more than 100 mm had specifically been developed for
saw mill saw blades. It provides the necessary support to apply the Real-Time-Analyser if tools with larger bore
diameters are to be analysed. The exchangeable saw blade support is therefore a practical accessory for all
sharpening services of saw mills.
The maximum bore diameter that can be applied on this support is 300 mm. For all saw blades with less than 100mm
bore diameter the included standard saw blade support should, however, still be used, in order to avoid any damage to
the saw teeth.
Mounting of the exchangeable support is very easy: Just open
the screw, change the support and fasten the screw. The
exchangeable support is thus changed in a twinkling.

13